Enable Ethernet
The SmartXX has an integrated web-interface.
If you want to use it, you have to switch on the ethernet option of the chip.

DHCP
If you have a DHCP server installed in you network and you don´t want to use a
static IP, your SmartXX is able to receive his IP-Adress from this server.

IP Adress
If you use a static IP here you can edit the IP-Adress of you SmartXX.

Subnet
Edit your subnet mask for your local network.

Gateway
When you are using a router you can set your gateway in this menue.

Save and EXIT
To save the changes of the IP Adress, Subnet and Gateway
you must choose this point.


The three lines on the bottom of the screen are showing your network settings
of your SmartXX (IP-Adress, Subnet-Mask and Gateway)